printing-tips2

BLEED GUIDELINES - What bleed is and how to use it properly

Bleed is a printing term that is used to describe a document which has images or elements that touch the edge of the page, extending beyond the trim edge and leaving no white margin.  When a document has bleed, it must be printed on a larger sheet of paper and then trimed down.

The example below shows how a document should be set up with bleed. This is the way you must set up your document if you intend to have graphics that extend all the way to the edges of the cut item. 

The example uses a business card, however the same principle and measurements apply to a document of any size. 

This does not only pertain to small printed items such as postcards, but larger documents as well. No printers can print right to the edge of a sheet therefore any standard size prints with bleed must actually be printed on a larger sheet and cut down. For example, an 8.5”x11” page with bleed must be printed on an 11”x17” sheet and then cut to size.

bleed_diagram

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

COMMON DOCUMENT & THEIR MEASUREMENTS WITH BLEED

  • 3.5” x 2“ business card  --->  3.75” x 2.25”
  • 4” x 6” postcard      --->       4.25” x 6.25”
  • 5” x 7” invitation     --->        5.25” x 7.25”
  • 8.5” x 11” sheet     --->        8.75” x 11.25”
  • 11” x 17” sheet      --->        11.25” x 17.25”
  • 12” x 18” sheet      --->        12.25” x 18.25”

The exception to the rule is LARGE FORMAT POSTERS

  • unmounted posters do not require bleed
  • mounted posters require 0.25” bleed on each side

For example:

  • 18” x 24”  --->   18.5” x 24.5”
  • 20“ x 20”  --->   20.5“ x 20.5”
  • 24” x 36”  --->   24.5” x 36.5”

 

HANDY TIP:

Rubiks works mostly with the Standard System of inches. If you work with the Metric System of centimetres, here is a how to convert your measurements to inches. 

centimetres ÷ 2.54 = inches

and vice versa: 

inches x 2.54 = centimetres